SATO GL4XXE Installationsanleitung PDF herunterladen (Seite 5)

Real-Time Clock Installation Guide

Figure 1. Removing the Left-Side Cover of the printer

GL4xxe Real-Time Clock Installation

Before installing the Real-Time Clock chip, make sure the printer is OFF and

disconnected from the power supply. Make sure you have discharged any static

electricity (by touching a grounded component on the printer). Remove all interface

cards prior to removing the rear side cover.

1. Use a Phillips head screwdriver to remove the three screws (1) that secure

the left-hand side cover [labelled (2) in the illustration below] that protects

the electronics of the printer.

2. Slide the side cover leftward and upward, as shown by the line marked (a).

3. Once the cover has been removed, locate the area circled in RED. There is

an empty socket for mounting the Real-Time-Clock chip.

(a)

1 2 3 4 5 6 7 8

Keine Kommentare

SATO GL4XXE Installationsanleitung Seite 5