SATO D508 Wartungshandbuch PDF herunterladen (Seite 83)

Unit 4: Standard Command Codes

E/Pro Programming Reference

4-31 PN: 9001096E

PRINT POSITION COMMANDS

MEDIA SIZE (DOTS)

FUNCTION

To set the size of the media.

FORMAT

<ESC>A1aaaabbbb

aaaa = Label Height in dots (0 to Hmax)

bbbb = Label Width in dots (0 to Vmax)

Place in a separate data stream to the printer.

INPUT

<ESC>A

<ESC>A108000640

<ESC>Z

OUTPUT

This command does not result in printer output. It is used to automatically adjust the offset

values for the size of label being used. The sample command stream specifies a label 640

dots wide by 800 dots long in 203 DPI.

(4-21)

NOTES

The Base Reference point is always the on the right (looking at the front of the printer) side of the print

head. This command adjusts the Base Reference Point to correspond with the right edge of the loaded

media.

If the label size is changed, then this command must be respecified to center the print image on the

label.

All eight variables “aaaa” and “bbbb” must be included in this command.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 289 290

Keine Kommentare

SATO D508 Wartungshandbuch Seite 83