SATO M8485S Betreibershandbuch PDF herunterladen (Seite 38)

An Advanced Setup Mode is provided to make adjustments that require only

occasional adjustments. Since they affect the basic operation of the printer, the

procedure for entering this mode is designed to prevent someone from accidently

changing the settings.

To enter the Advanced Mode, the printer is powered on while pressing the LINE

key. The printer will beep one time and display Advanced Mode on the LCD panel.

Note: Pressing the LINE key at this time will take you to the Advanced Mode Counters

display(see page 3-16).

Pressing the FEED key will advance the display to the first setting selection.

Zero Slash Setting

This setting determines if a zero is printed with a slash or without a slash. This setting

can also be controlled via software commands. When YES is selected, the U, S, M,

WB, WL, XU, XS, XM, XB, XL and vector fonts will have a slash through the center of

the zero character.

1. Use the LINE key to step the underline cusor to either the YES or NO selection.

2. Once the correct setting is underlined, pressing the FEED key will accept the

setting and advance the display to the Auto Online display.

Auto Online Setting

This setting determines the mode in which the printer powers up. If the YES selection

is made, the printer powers up in the ON LINE mode and is ready to print. If NO is

selected, the printer powers up in the OFF LINE mode and must be manually placed

in the ON LINE mode by pressing the LINE key before it is ready to print.

1. Use the LINE key to step the underline to either the YES or NO selection.

2. Once the correct setting is underlined, pressing the FEED key will accept the

setting and advance the display to the Vertical Offset display.

ZERO SLASH

YES NO

AUTO ONLINE

YES NO

Section 3. Configuration

Page 3-10 9001034 Rev E SATO “S” Print Engines

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 227 228

Keine Kommentare

SATO M8485S Betreibershandbuch Seite 38