SATO CX200 Betriebsanweisung PDF herunterladen (Seite 5)

Media Adjustment - This adjustment uses the print dot history to adjust the heat

used to image the first print line. It can be used to optimize the print quality of

rotated bar codes. The middle (or 50%) position is set up to provide the optmium

results when using the SATO media supplied with the printer. When using other

media, it may be necessary to adjust this setting to get acceptable print quality.

Note: The human-eye is not well suited to gauging the quality level of bar codes.

It is recommended that you use a bar code verifier to ensure that you are printing

usable bar code symbols.

Overlays - This selection allows you to use forms Overlays (see page 40 of the

CX200 Programming Guide). If you select this option, you cannot use the Expanded

Print Length feature.

Expanded Print- The standard label length for the CX200 is 7 inches. Selecting this

option will allow you to print labels up to 14 inches long (see page 51 of the CX200

Programming Guide). If you select this option, you cannot use the Overlays feature.

IMMEDIATE

Selecting the immediate button will bring up the Immediate Commands Dialog Box.

Immediate commands are configuration settings that are sent once to the printer and

are stored in the flash memory. They remain active until another set of commands are

received.

Serial Settings - These paramters set the serial receive parameters of the CX200.

They must match the RS232 Serial settings on the COM port selected for the printer.

If they do not, the printer will ignore any attempt to communicate with it. Once the

desired settings are selected, the Send button will transmitt the settings immediately

to the printer. The printer settings can be verified by printing a Test Label. These

settings have no effect if a parallel port is used to communicate with the printer.

Test - Selecting this button will print a simple test label to verify that the computer

and printer are communicating properly.

CX 200 Windows Driver

SATO CX200 Printers PN 9001051 Page 4

1 2 3 4 5 6 7

Keine Kommentare

SATO CX200 Betriebsanweisung Seite 5