SATO CX200 Betriebsanweisung PDF herunterladen (Seite 7)

• Code 128A, 128B or 128C

• Postnet 32, 37, or 52

• Bookland (UPC/EAN 2 or 5 digit supplements)

Height - This is the height of the bar code in inches or cm. For optimum reading

with a hand scanner, the height of a bar code should not be less than 0.5 inches.

Expansion - This selects the expansion factor used to create a bar. A “1” expansion

will create a narrow element one dot (0.005") wide. A “2” expansion will create a

narrow element two dots (0.010") wide. It is recommended that the minimum

expansion chosen is “2”. Anything less may impair the readability of the bar code.

Narrow to Wide Ratio - Some bar codes have only two element widths, either

narrow or wide. This selects the ratio used to create the wide element. If an

Expansion of “2” was selected and a ration of 1 to 3, then the narrow element would

be 2 dots (0.010") wide and the width of the wide element would be 6 dots (0.030").

It is recommended that a 1:3 ratio be used if possible as it will provide twice the

tolerance of a 1:2 bar code. Some bar codes have more than two element widths.

These bar codes are alswys printed in a 1:2 ratio and the other choices are “greyed

out” (non-selectable).

Auto Translation - The data encoded in the bar code can be automatically printed

in a human readable font. Selecting Below will print the data below the bar code,

selecting Above will print the data above the bar code and None will not print the data

in human readable format. Note that some bar code specifications specify the human

readable information to be printed in certain locations. For these cases, the illegal

choices are “greyed out” (non-selectable).

Options: Descender Bars - For UPC and EAN bar codes, Descender Bars can be

printed at the beginning, end and middle of the bar code. These bars generally bound

the human readable information. This option is not selectable for other bar codes.

Rotation - Any of the bar codes can be printed in any one of four rotated positions.

The choices are 0°, 90°, 180° and 270°.

CX 200 Windows Driver

SATO CX200 Printers PN 9001051 Page 6

1 2 3 4 5 6 7

Keine Kommentare

SATO CX200 Betriebsanweisung Seite 7